| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Service Support |
| Warranty: | Two Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1400 Degree Inert-atmosphere Furnace Heating Atmosphere Furnace heating with -0.1Mpa Vacuum High Temperature Electric Muffle Furnace Lab Small Vacuum Furnace
Powder metallurgy is recognized by the industry as a green and sustainable manufacturing process technology. The powder metallurgy process only needs to use a few processes to manufacture the same part, that is, it can complete the process with more and more complex processes. Among them, the MIM metal injection molding technology was developed. The powder micro-injection molding is used to facilitate the manufacture of microstructures. The specific surface area of the powder is increased, and the binder viscosity is low but has high strength. The parts, the process conditions are harsh and widely used.
The final formability of powder metallurgy is its main advantage. For example, when forming a toothed part, up to 40% of the material in conventional cutting processes turns into chips, while 85% of all powders used in powder metallurgy are produced from recycled materials. In the production process of powder metallurgy parts, the waste loss of each process is generally 3% or less, and the material utilization rate can reach 95%. The most important tool required to complete these operations is the vacuum sintering furnace.
1400 Degree Inert-atmosphere Furnace Heating Atmosphere Furnace heating with -0.1Mpa Vacuum High Temperature Electric Muffle Furnace Lab Small Vacuum Furnace
1400 Degree Inert-atmosphere Furnace Heating Atmosphere Furnace heating with -0.1Mpa Vacuum High Temperature Electric Muffle Furnace Lab Small Vacuum Furnace
SPECIFICATIONS:
|
1400 degree high temperature 12L electric Sintering Furnace
|
|
|
Max.temperature
|
1400°C
|
|
Working temperature
|
0-1300ºC
|
|
Furnace Chamber size(DWH)mm
|
300*200*200 or as your requirement
|
|
Heat element
|
SiC Heating Element & Resistance wire
|
|
voltage and frequency
|
110v 220v 380v 50Hz/60Hz
|
|
Heating rate
|
0-20C/min
|
|
Temperature accuracy
|
±1°C
|
|
Thermocouple
|
K type
|
|
Control Type
|
Push Button
|
|
Temperature control
|
Adopt international advanced temperature controller, with 30-50 programmable PID self-tuning, automatic temperature rise, automatic temperature drop, no duty.(can be replaced by touch screen with additional order) |
|
Appearance design
|
The electric furnace adopts humanized design, beautiful and easy to operate, and the outer layer of paint is sprayed with high temperature baking technology. High temperature resistance, oxidation resistance, acid and alkali resistance. Color selection is aging resistant tone, will not cause the appearance color fade due to a long time of use. |
|
Furnace shell structure
|
Electric furnace shell adopts double layer forced air cooling structure, so that the electric furnace works at the highest temperature and the surface temperature of the shell is below 45ºC,And it is safe . |
|
Temperature control security
|
The electric furnace adopts integrated circuit, module control, double circuit protection (partial temperature protection, ultra-high temperature protection, coupling protection, overcurrent protection, overpressure protection and other protection functions) to make the electric furnace work stable and reliable, safe. |
|
Furnace door style
|
Front open to aside Power cutting off when furnace door open |
|
Furnace Chamber material |
Three layers of ceramic fiber insulation materials First layer: 1400°C ceramic fiber board, density 550kgs/m3. Thermal conductivity (1400ºC) is only 0.18W/m.k. Second layer: 1400°C ceramic fiber board, density 400kgs/m3. Third layer: 1460°C ceramic fiber board, density 320kgs/m3. The advantage is light weight, high temperature resistance, cold and heat resistance, no crack, no crystallization, no slag, do not worry about pollution of the fired products. The energy saving effect is 60-80% of the old electric furnace. |
|
Furnace chamber design |
Furnace adopts the stepped assembly structure, integrating the mechanical law, effectively ensure the furnace in the heating process of uniform force, ensure that the heat is not easy to disperse, prolong the service life of the furnace. |
|
Inlet gas/Atmosphere
|
It can be filled with a variety of protective or destructive gases, inert gases, mixed gases, nitrogen, argon, oxygen, etc
|
|
Gas control
|
The air inlet can be set up 1 or more air intakes, each air inlet is provided with a needle valve, connected with a vacuum gauge. The air outlet is connected with one air outlet, and all holes are equipped with needle valves. Equipped with a vacuum pump. |
|
Standard accessories
|
Crucible tongs 1pc, Thermal gloves 1 pair,User manual 1 pc,other small tools for assembly furnace
|
|
Other temperature options
|
1000ºC, 1200ºC,1400ºC, 1600ºC,1700ºC,1800ºC
|
|
Furnace chamber standard size
|
100*100*100mm,200*150*150mm,300*200*200mm,400*300*300mm 500*300*300mm, 600*600*600mm,800*500*500mm,1200*600*600mm or other OEM size |
|
Waranty
|
One year
|
|
Furnace Chamber Size and Temperature can customized
|
|
1400 Degree Inert-atmosphere Furnace Heating Atmosphere Furnace heating with -0.1Mpa Vacuum High Temperature Electric Muffle Furnace Lab Small Vacuum Furnace
1400 Degree Inert-atmosphere Furnace Heating Atmosphere Furnace heating with -0.1Mpa Vacuum High Temperature Electric Muffle Furnace Lab Small Vacuum Furnace
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available.
4. Exclusive and unique solution can be provided to our customer by our well-trained and
professional engineers and staff.
5. Professional factory : We are manufacturer, specializing in laboratory furnaces.
){kind=link}